Send Email

OMT-TEX
We are Manufacturer, Supplier, Developer, Service Provider of OMT-TEX Self Lubricated Bearings, For Automobile Suspension, Auxiliary Of Agriculture, Construction Machines, Ball Butterfly, Sluice Valves And Water Pumps and our setup is situated in Kolhapur, Maharashtra, India.
This is new material consist of PTFE fibers fabric as self lubricated layer and intermediate layer of sintered bronze with carbon steel backing. It has longer service life under lower speed with high shock load along with no swelling and good damping behaviors.
Application : Automobile suspension, auxiliary of agriculture, construction machines,cranes, ball butterfly and sluice valves and water pump etc.
Bearing Properties | Unit | Value |
---|---|---|
Maximum specific load Static | N/mm2 Psi | 400 58000 |
Maximum specific load dynamic | N/mm2 Psi | 180 26100 |
Maximum sliding speed | m/s fpm | 0,5 100 |
Maximum PxV factor | N/mm2 x m/s | 2,5 |
Maximum PxV factor (short periods) | N/mm2 m/s | 10 |
Dry coefficient of friction | µm | 0,03 ÷ 0,15 |
Maximum temperature | oC oF | +260oC +500oF |
Minimum temperature | oC oF | -180oC -292oF |
Shaft finish Ra (recommended) | µm | 0.4 Ra |
Shaft hardness (recommended) | HB | >200 |
Operating Conditions
Dry | Very good |
---|---|
Oil | Fair |
Grease | Fair |
Water | Fair |
Process fluid | Fair |