Send Email

response@dubush.com

Kolhapur

Maharashtra, India.

OMT-PMAX

Bearing layer of OMT-106 is composed of excellent designed woven structure of PTFE fiber and high strength synthetic fibers with specially formulated solid lubricant additions.

OMT-106 composite bearings maintain high compressive strength with fiberglass-epoxy backing layer which is manufactured at a specific angle by filament winding process.

OMT-106 is self-lubricating sliding composite bearing with high load carrying capacity to be applied under slow speed rotating, oscillating and reciprocating movements.

OMT-106bearings have excellent wear resistance property and very good resistance against shock, vibration loads.

There are two types of bushes in OMT-106, SF-A and SF-B which difference as per application.

OMT-PMAX
Request A Quote

Bearing Properties Unit Value
Maximum specific load Static N/mm2   Psi 250    36250
Maximum specific load dynamic N/mm2   Psi 140    20000
Maximum sliding speed m/s    fpm 0.25    50
Maximum PxV factor N/mm2;x    m/s 1.6
Maximum PxV factor N/mm2;x    m/s 1.9
Dry coefficient of friction µm 0.03 - 0.12
Maximum temperature oC +180oC
Minimum temperature oC -100oC
Shaft finish Ra (recommended) µm 0.4 Ra
Shaft hardness (recommended) HB >350

Operating Conditions

Dry Very Good
Oil Very Good
Grease Good
Water Fair