OMT-PR
OMT-PR
We are Manufacturer, Supplier, Developer, Service Provider of OMT-PR Self Lubricated Bearings, For Textile Machines, Joint Bearings, Door Hinges and our setup is situated in Kolhapur, Maharashtra, India.
It's made of phosphorous
bronze mesh and the compound of modified PTFE as its layers on both or single side of the backing. The product ids widely applied to textile machine, joint bearing, door hinges and joystick of automobile etc.
Bearing Properties | Unit | Value |
---|---|---|
Maximum specific load Static | N/mm2 Psi | 100 14500 |
Maximum specific load dynamic | N/mm2 Psi | 80 11600 |
Maximum sliding speed | m/s fpm | 1.0 400 |
Maximum PxV factor | N/mm2 m/s | 1 |
Maximum PxV factor (short periods) | N/mm2 m/s | 3 |
Dry coefficient of friction | µm | 0.05 - 0.2 |
Maximum temperature | oC | +260oC |
Minimum temperature | oC | -200oC |
Shaft finish Ra (recommended) | µm | 0.4 Ra |
Shaft hardness (recommended) | HB | >200 |
Operating Conditions
Dry | Very good |
---|---|
Oil | Very good |
Grease | Good |
Water | Fair |